Designer Epoxy-Pro Series (1.5 Gal / 5.6L)
Original price was: $198.95.$139.00Current price is: $139.00.
In stock
Designer Epoxy Pro Series is a 2:1 By Volume Mix.
Highly Scratch and UV Resistant, Allowing Pours Up to 0.5 " inches. Pro series is Designed for Coatings , Arts, Crafts, Charcuterie Boards, Jewelry, Resin Arts, Molds & More . Pro Series Is A More Liquidy Formula As Its 2:1 Ratio Then Our ARTCAST Which Is 1:1 Also Using the Bluetec Technology to Prevent Yellowing. • For Clear Casting 1/8″ or Less And It Will Be Clear!!
• 100% Solids
• *NOTE Part A is Cloudy And Part B is Clear, For Clear Casting Must Be 1/8 or Less. 1/8 Or More will be Cloudy & Best For Mixing Colors More Then 1/8.. For Super Clear resins, Please Check Out Our ArtCast Or Deep Casting Epoxy Which Are Water Clear Results...
• Mix Ratio By Volume 2:1 : A:B = 2:1
Contains 1 x Part A Resin 1 Gal – .5 x Gal Part B Hardner Complete Kit
• Mix time 3.5 to 4 minutes
• Working time 55 / 60 minutes
• Initial cure time 12 / 14 hours dry touch
• Full cure 24 hours
• Re-coat application 18 / 24 Hours
• Thickness application very thin up to 0.5 inches single pour
• Can be poured more than 0.5 inch (example: cracks, voids, crevices, on very small projects
• Hardness 88/90 shore D
Heat Tolerance 225 Celsius Degrees 437 Fahrenheit After 2 To 3 Weeks Of Cur
• Finish/Glossy: Coverage: 65 sq. ft. per 1.5 Gal
• Highly resistant to scratches
• UV resistant against yellowing
• 0 Voc / With No Odor
• No fillers
• Best cure temperature: 20 degrees Celsius Or / 68-70 Fahrenheit (colder temperatures may affect cure time)
• Shelf life unopened: 12-14 months
• Shelf life opened: 8 -10 months
• Ideal For: Coatings, Wood Turning Coatings, Charcuterie Boards, Arts, Crafts, Furniture, Jewelry, Coasters, Resin Arts, Molds & More.
✅️ FOOD SAFE: Once cured, the product simply becomes a non-toxic plastic, which is considered food-safe.















12 reviews for Designer Epoxy-Pro Series (1.5 Gal / 5.6L)