Sale!

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 2

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 3

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 4

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 5

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 6

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 7

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 8

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 9

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 10

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 11

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 12

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 13

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 14

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 15

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 16

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 17

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 18

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 19

Designer ArtCast Epoxy (0.5gal / 1.89L) - Image 20

Designer ArtCast Epoxy (0.5gal / 1.89L)

Name: Designer Art Casting Resin (0.5gal / 1.89L) - Designer Epoxy
Price: 79.95 USD
Availability: InStock
Rating: 5.00 (23 reviews)

Rated 5.00 out of 5 based on 23 customer ratings

(23 customer reviews)

Original price was: $99.95.Current price is: $79.95.

CRYSTAL CLEAR ART CASTING RESIN

Designer Art Casting (ArtCast) resin is our newest resin that is easy to mix and prevents mistakes, highly scratch and UV resistant, allowing pours up to one inch. The ArtCast stands out as a superior product by also using the bluetec technology to prevent yellowing. Perfect for countertops, arts, crafts, flood coats, charcuterie boards, jewelry, coasters, tumblers, resin arts, molds and much more.

In stock

Description
Reviews (23)

Designer ArtCast epoxy resin is easy to mix and prevents mistakes, highly scratch and UV resistant, allowing pours up to 1 inch. The ArtCast stands out as a superior product by also using the bluetec technology to prevent yellowing.

*ArtCast is a medium viscosity For Better Control And Flow*. For A Better Or Thinner Viscosity Epoxy Of The ArtCast, Place Both A + B Jugs In Hot Water From Tap In A Sink Below The Caps Line , Or If You Have Electric Heater Blanket For About 10 Min To Warm It Up Before Measuring And Then Mixing Your Epoxy. This Will Help Thin It Out, Eliminating Air Pockets In Your Mix & Will Flow Amazing . Have a hand held torch or heat gun to zap any bubbles that may occur.

Easy To Use, Simple to Mix, 1:1 Mix Ratio
Superior Clarity
100% Solids
Mix Ratio By Volume : A:B = 1:1 Contains Complete Kit For Use
1- A Resin / To 1- B Hardner
U.V Resistant Resin / Anti -Yellowing
Mix Time 3.5 to 4 Min Slow Mix
Mix A+B Resin Till It Comes Water Clear
ArtCast Is A Medium Viscosity & Mixing By Hand With Mixing Stick Produces Better Result, Less Air Pockets Then A Drill
Working Time 50 - 55 min
Initial Cure Time 12 -14 Hours
Dry Touch 8 -10 Hours
Full Cure 16 - 24 Hours
Re-Coat Application 8 -10 Hours
Finish: Glossy
Cures water clear
Pour thickness: very thin application, up to maximum of 1 inch single pour
Can be poured more than 1 inch (example: cracks, voids, crevices, on small projects like spheres etc.
Coverage: 80 sq. ft. per 2 gallons
Hardness 89/91 ( Shore D )
Heat Tolerance 225 Celsius Degrees 437 Fahrenheit After 2 To 3 Weeks Of Cure
Highly Resistant To Scratches
0 Voc / With No Odors
No Fillers
FOOD SAFE: Once cured, the product simply becomes a non-toxic plastic, which is considered food-safe
Shelf Life Unopened: 12-14 months
Shelf Life Opened: 8-10 months
Ideal For : Countertops, Flood coats, Charcuterie boards, Arts, Crafts, Jewelry, Coasters, Tumblers, Resin Arts, Molds & More.

For instructions please refer to our instruction videos.

23 reviews for Designer ArtCast Epoxy (0.5gal / 1.89L)

John Hayes

Rated 5 out of 5

I used the Artcast to seal the edges of an oak coffee table before using the Deep Casting and it worked great!

Calvin Lindsay Jr

Rated 5 out of 5

I needed to do a small retouch on a river table project and worked with the Artcast product for the first time. As usual, Designer Epoxy didn't disappoint. The use was easy, the turnaround time, from application to cure, allowed me to complete the project without adding a bunch of time, and the results were just as I expected. And... the personal note that comes with each order really makes me glad that I'm connected to this company!

Johnny Tolly

Rated 5 out of 5

john

Rated 5 out of 5

The postal service lost the order and Joe responded quickly to get a 2nd shipment out to me. He kept me informed as to what was happening. Very good customer service and highly recommend doing business with him.

Gary Poulsen

Rated 5 out of 5

Anonymous

Rated 5 out of 5

Anonymous

Rated 5 out of 5

George Steenson

Rated 5 out of 5

Always a great experience purchasing from Designer Epoxy!

Designer ArtCast Epoxy (0.5gal / 1.89L) photo review

Frank Didomizio

Rated 5 out of 5

Excellent product for use my my charcuterie boards and for filling voids and holes in my woodturning projects.

Gladys dunn

Rated 5 out of 5

This is a very good product. Have tried others but like this better.

Scott

Rated 5 out of 5

Worked great

Scott

Rated 5 out of 5

Great product

LiseAnne

Rated 5 out of 5

As usual everything was perfect. Best epoxy, best service. 5 stars all the way 💕

Craig Hertzog

Rated 5 out of 5

Great product and easy to work with. My customers have loved the products that I've made using this

Joe

Rated 5 out of 5

Great product

Gord Churchill

Rated 5 out of 5

I bought the Epoxy, to fill voids in wooden bowls I have been turning. I partially turned the bowl, found that there was a crack across the bottom, and did not want to loose the bowl as it had wild grains and colour. I mixed some of the epoxy with a fire engine red dye, and having taped off the bottom filled the cavity. I was using black gaffers tape, and while the tape initially held somewhere in the hardening process, the epoxy found a pin hole crack and gave part of my bench a lovely coating of epoxy, which was not easy to chip off. I then used a metal tape designed for duct work and found it worked much better. I am delighted with the final result and will now be dreaming of other places I can use it as an accent to fill voids and increase the beauty of my creations, Thanks Designer Epoxy, it is a great product, albeit one I had to experiment with to learn how to use it.

clem steubing

Rated 5 out of 5

Very clear and easy to use

E. Louise Badgley

Rated 5 out of 5

I began using this company's resin approx one year ago. I had tried using other resins for my art work....from applying resin on my many paintings initially to sculpting with resin. Initially I only used the 'casting resin' as the deep cast seemed like 'over kill' for the work I was doing at the time. I found issues with other resins from yellowing, to countless micro bubbles so badly that the distortion of the elements I had placed in the resin left one wondering 'what is that in there?', to even having on one painting I did, a spot of mold..yes black mold! Thankfully only 1 spot and on one painting but at the price I paid for the resin? Ridiculous! The resin was 'supposed' to be at the top of the research for NOT yellowing. BS! And it was not an out of date product either! I am aware that they say 'all resins yellow eventually' but within 2 weeks? Come on let's be real here....it should not yellow so quickly especially when the art work has not been in the sun and when the colors used were not primarily white (white usually shows up the yellowing quite quickly so my paintings of choice to resin were very colorful which was easy to do given I was doing landscapes at the time). I also had another resin with fumes that filled my entire house including the basement! The fumes did not dissipate quickly either despite my opening all the windows and doors! Another resin flash cured in my 'bubble remover' within minutes of my putting the resin in it...scaring the 'chit' out of me! So by chance I found this Designer epoxy website and took a chance and put in a small order. Wow! Just wow! Clear? AS GLASS...so clear I had difficulty taking photos that didn't look like glass lol! And bubbles? I didn't have to pre warm it either before putting it my bubble remover! I cannot say enough about this resin. I hope my pictures will show the proof of what I am saying! I have moved on and am using the deep cast now as well! That is about the product....I now have to put in my highest regards/reviews regarding the owner of this company...Gabriel! It would take a book to begin to tell you about the attributes of this individual but let me tell you.....if you have ANY issues, any at all....talk to him! He can answer any of your questions regarding the use of his products and he is so polite, so pleasant with a great sense of humor. He is the ultimate professional. He has never lost his patience with me when I have called him outside of work hours when I have forgotten the difference in time zones lol! He has never ever made me feel stupid, inferior or less then I am! He has also taken it upon himself to rectify issues that were NOT of his making (Canada Post has had some issues lol). He not only rectified the issues but went far beyond what any other individual, owner or otherwise, has ever done ! I will be a loyal customer for both reasons....the product itself and the man that stands behind his product!

Gina C

Rated 5 out of 5

I used this epoxy to coat the inside of a vase I turned and it did a great job. I also used the epoxy to cast another piece of work.

Wadih

Rated 5 out of 5

By far the best epoxy resin i have ever used. I have been getting all kinds of resin from Designer Epoxy, the clearest and easiest to work with

Randy F.

Rated 5 out of 5

Easy to use

Anne Hofmann

Rated 5 out of 5

For the past couple of years, I've been purchasing resin and pigments from Designer Epoxy. Their products have consistently been of the highest quality. The resin is crystal clear and when used at the right temperature, I haven't experienced any issues with bubbles. It's a foolproof process that I can always rely on.