Designer ArtCast Epoxy Bulk (4gal / 15.2L)
Original price was: $399.95.$279.00Current price is: $279.00.
CRYSTAL CLEAR
Designer ArtCast is our newest resin that is easy to mix and prevents mistakes, highly scratch and UV resistant, allowing pours up to one inch. The ArtCast stands out as a superior product by also using the bluetec technology to prevent yellowing. Perfect for Countertops, Arts, Crafts, Flood coats, Charcuterie boards, Jewelry, Coasters, Tumblers, Resin Arts, Molds & More.
Designer ArtCast epoxy resin is easy to mix and prevents mistakes, highly scratch and UV resistant, allowing pours up to 1 inch. The ArtCast stands out as a superior product by also using the bluetec technology to prevent yellowing.
*ArtCast is a medium viscosity For Better Control And Flow*. For A Better Or Thinner Viscosity Epoxy Of The ArtCast, Place Both A + B Jugs In Hot Water From Tap In A Sink Below The Caps Line , Or If You Have Electric Heater Blanket For About 10 Min To Warm It Up Before Measuring And Then Mixing Your Epoxy. This Will Help Thin It Out, Eliminating Air Pockets In Your Mix & Will Flow Amazing. Have a hand held torch or heat gun to zap any bubbles that may occur.
- Easy To Use, Simple to Mix, 1:1 Mix Ratio
- Superior Clarity
- 100% Solids
- Mix Ratio By Volume : A:B = 1:1
1- A Resin / To 1- B Hardner - Contains 2 x Part A Resin 1 Gal – 2 x Part B Hardner 1 Gal Complete Kits
- U.V Resistant Resin / Anti -Yellowing
- Mix Time 3.5 to 4 Min Slow Mix
- Mix A+B Resin Till It Comes Water Clear
- ArtCast Is A Medium Viscosity & Mixing By Hand With Mixing Stick Produces Better Result, Less Air Pockets Then A Drill
- Working Time 50 - 55 min
- Initial Cure Time 12 -14 Hours
- Dry Touch 8 -10 Hours
- Full Cure 16 - 24 Hours
- Re-Coat Application 10 -12 Hours
- Finish: Glossy
- Cures water clear
- Pour thickness: very thin application, up to maximum of 1 inch single pour
- Can be poured more than 1 inch (example: cracks, voids, crevices on small projects like spheres etc.,
- Anything More Then 1 Gal, Must Be Divided Into 2 Pours
- Coverage: 80 sq. ft. per 2 gallons
- Hardness 89/91 ( Shore D )
- Heat Tolerance 225 Celsius Degrees 437 Fahrenheit After 2 To 3 Weeks Of Cure
- Highly Resistant To Scratches
- 0 Voc / With No Odors
- No Fillers
- FOOD SAFE: Once cured, the product simply becomes a non-toxic plastic, which is considered food-safe.
- Shelf Life Unopened: 12-14 months
- Shelf Life Opened: 8- 10 months
- Ideal For : Countertops, Flood coats, Charcuterie boards, Arts, Crafts, Jewelry, Coasters, Tumblers, Resin Arts, Molds & More.
Related products
-
Part B Artcast
$84.49 -
Sale!
Designer Epoxy-Deep Casting (15gal / 57L)
Original price was: $1,495.75.$969.00Current price is: $969.00. -
Sale!
UV RESIN 1Litre Bulk
Original price was: $279.80.$174.95Current price is: $174.95. -
Sale!
Designer ArtCast Epoxy Bulk (10gal / 38L)
Original price was: $999.75.$659.00Current price is: $659.00.
19 reviews for Designer ArtCast Epoxy Bulk (4gal / 15.2L)