Designer Epoxy-Deep Casting (15gal / 57L)

CAST MORE IN ONE POUR WITH DESIGNER EPOXY

• • • Super Clear-Water Clear Finish
    • 100% Solids
    • Mix ratio by volume: A:B = 2:1
    • Pressure Pot Not Necessary With This Product
    • Contains 10 x Part A Resin 1 Gal  – 5 x Part B Hardner 1 Gal Complete Kits
    • Working time: 6-7 Hours
    • Mix time: 5-6 minutes
    • Thin Viscosity Allowing Deep Penetrating And Stabilizing
    • UV Resistant-Premium Finish
    • Dry To Touch: 36 - 48 Hours
    • Cure Time: 72 hours
    • Recommended 72+ Hour Demold, depending on volume
    • Best Cure Temperature: 20 Degrees Celsius (colder temperatures may affect cure time)
    • Hardness: 90 (shore D)
    • Heat Tolerance 225 Celsius Degrees 437 Fahrenheit After 2 To 3 Weeks Of Cure
    • Finish: Glossy
    • Pour thickness: up to 6'' inches. Recommend 1 inch minimum
    • For Filling Voids, Cracks Or Crevices ,Example At 1'' Inch? We Recommend Filling It With Our ArtCast Epoxy Or FastCure Epoxy As Deep Casting Will Take Longer To Cure As Its A Small Volume !!
    • Can be poured at 1/2 inch but will take 4 days to cure on bigger projects
    • For very large pours over 6 or 9 gallons, 2 separate pours are recommended
    • Can be poured more than 5 inches on smaller volumes
    • To design swirl effects, 12-14 hours after initial pour
    • Will not distort with age
    • Excellent air release qualities
    • Cures water clear
    • FOOD SAFE:
    • 0 VOC
    • Bubble free
    • No Fillers
    • Enhanced blu-tec technology to prevent yellowing
    • Anti-ultraviolet
    • No odor / no fumes
    • Shelf Life Unopened: 12-14 months
    • Shelf Life Opened: 8- 10  months

For instruction please refer to instruction videos.